The Development of a Specific Nanofiber Bioreceptor for Bacterial Detection at Salimpour Site.

As the global facial mask market continues to grow, consumers have put forward higher requirements for the functionality and ingredients of mask products. Ordinary facial masks mostly use ordinary non-woven fabrics as the mask base fabric and are used with essence. Preservatives are generally added. At the same time, they are susceptible to the influence of the external environment and are easily oxidized, causing the mask to deteriorate and cause skin allergic reactions. In addition, traditional facial masks have problems such as poor fit with the skin, poor breathability, insufficient absorption of nutrient solutions, and easy dripping. 2024-06-01

The microstructure, wettability, and electrochemical performance of MXene/polyacrylonitrile (PAN)-derived hybrid carbon nanofiber membranes (MCNFs)... 2024-08-27

2024-09-01

In this study, we developed a new technique, simultaneous foam electrospinning and electrospraying (FE/E), that produces nanofiber/nanoparticle electrodes at higher production rates compared to needle‐based electrospinning and electrospraying (E/E). Herein, the nanofiber amount was precisely controlled by applying various voltages on the foam electrospinning process at a fixed platinum (Pt) loading, which enables an exclusive investigation into the impact of ionomer nanofiber on fuel cell performance at ultra‐low Pt loadings for proton exchange membrane fuel cells. The results show that fuel cell performance is strongly dependent on ionomer nanofiber content. At 0. 2024-11-01

Citation: Brockhagen, B.; Hellert, C.; Grothe, T.; Güth, U.; Storck, J.L.; Ehrmann, A.; Wortmann, M. Freestanding Flexible Carbon Nanofiber Mats for Energy Storage Applications. Mater. Proc. 2025, 21, 1. Abstract: Carbon nanofiber mats can be applied for diverse energy applications. Usually, they should be freestanding and show sufficient structural stability. Poly(acrylonitrile) (PAN) is often used as the base material for electrospinning due to its high carbon yield during carbonization. Carbonized PAN nanofiber mats, however, may be brittle and break under mechanical load. Here, we report a study of the impact of ZnO and tetraethyl or-thosilicate (TEOS) as nanoparticle additives on the 2025-02-01