Smart Nanofiber Patch for Effective Diabetic Ulcer Wound Healing in ssalimpour

Plant biomass is a sustainable resource created by absorbing and fixing carbon dioxide from the atmosphere. The basic unit of cells is made up of... 08/03/2026

---

Diabetic ulcer is a prevalent complication affecting a large number of individuals globally and presents a significant challenge in healthcare, often... 08/03/2026

---

The properties of produced nanofibers are normally too small to be observed with the naked eye. Therefore, advanced equipment is necessary to... 08/03/2026

---

The target audience of this is senior undergraduate and graduate students, researchers, and engineering practitioners who are about to enter or... 08/03/2026

---

We report the nanofiber-reinforced composite electrodes as the highly transparent (~90%) and extremely foldable electrodes with lower sheet... 08/03/2026

---

Researchers used sub-10-nm silver nanoparticles to bridge copper microparticles and silver nanoflakes, creating a micro-nano hybrid thermal interface material with a thermal conductivity of 330.0 W/(m·K). In a model LED package, the nano-enabled hybrid reduced effective die-attach thermal resistance by 44% compared with a commercial silver paste while using less silver. 08/02/2026

---

Researchers in the lab of Sam Peng, the Pfizer Inc.–Gerald Laubach Career Development Assistant Professor of Chemistry at MIT and a core institute member of the Broad Institute of MIT and Harvard, have developed a super-resolution ... 08/03/2026

---

Most sensors are designed to do only one thing: detect what passes through them. But what if a sensor could do more? To create a new generation of technology, researchers have looked to living systems for inspiration. If ... 08/02/2026

---

PFAS, otherwise known as forever chemicals, have become commonplace in numerous everyday and industrial products. At the same time, they are some of the most problematic pollutants of our times: They are extremely durable, ... 08/01/2026

---

The COVID-19 pandemic highlighted severe consequences of unchecked respiratory disease, including cytokine storms. This phenomenon affected many COVID-19 patients and is a potential side effect of many other diseases involving ... 08/01/2026

---

The energy system of the future will require sustainable catalysts that, for example, enable the efficient production of green hydrogen. Materials consisting of mixtures of five chemical elements show great promise for enabling ... 07/31/2026

---

Researchers 3D-nanoprinted hollow-core Photonic Scaffolds with up to 80% cladding openness, with models predicting attenuation at or below 1 dB/mm at that openness and experiments measuring sub-1 dB/mm losses at 68% openness. The waveguides supported dye diffusion in about 34 seconds, a 1.4 nL effective interaction volume, and quantum-dot emission with output photon statistics consistent with single-photon emission after transmission. 07/30/2026

---

Researchers found that deep-sea carbonate fluorapatite comprises apatite nanocrystals embedded within an amorphous matrix that primarily hosts samarium, used as a probe for rare earth elements. This disordered nanoarchitecture helps explain why rare earth elements can be readily extracted by acid leaching despite fluorapatite’s low solubility. 07/29/2026

---

Recent studies reveal how environmental weathering of polystyrene leads to nanoplastics, prompting innovative solutions through nanotechnology and microbes. 07/29/2026

---

A systematic review of 212 studies linked experimental exposure to microplastics and nanoparticles to oxidative stress, impaired growth and reproduction, and increased mortality across biological models. Smaller particles, higher concentrations, and polystyrene were associated with stronger effects, although laboratory conditions and limited human evidence restrict conclusions about real-world health risks. 07/28/2026

---

A review proposes an integrated framework linking feedstock engineering, scalable processing, structural control, quality assurance, sustainability, and regulation to improve industrial nanocomposite production. It finds that AI, digital twins, real-time monitoring, and closed-loop control could improve production consistency, although data, validation, infrastructure, and standardization barriers still limit adoption. 07/28/2026

---

Hybrid bonding advances semiconductor packaging, enabling compact assemblies with high performance and reliability for next-gen microelectronic devices. 07/08/2026

---

KLA Instruments' SRX option transforms nanoindentation, addressing high-strain-rate testing challenges and improving understanding of material performance. 07/14/2026

---

The discovery of non-porous MOF thin films has altered our understanding of their stability and transport properties. We take a closer look. 07/15/2026

---

Optimize materials design with KLA's SRX nanoindentation workflow, focusing on strain-rate sensitivity for improved understanding of rate-dependent behavior. 07/24/2026

---